Reply within 1 business dayWhatsApp
Blog

How to Size a Food Freeze Dryer: From Daily Output to Square Metres

LyoFry · Shanghai
Buying Guides3 min readBy LyoFry Engineering Team
Freeze-dried strawberry slices, mango cubes, banana slices and blueberries on freeze dryer trays (illustration)

Short answer: Divide your daily wet-material target by the batches you can run per day (usually 1 for a 24-hour cycle), then divide by a loading density of roughly 8–10 kg of wet product per m² of shelf. The result is the drying area you need; round up to the nearest standard chamber.

Step 1 — Start from wet material, not finished product

Freeze dryers are rated by the wet material they load. Fruit is 80–90% water, so 1,000 kg of fresh strawberries yields only around 100–150 kg of finished product. Work backwards from the finished kilograms you want to sell.

Step 2 — Estimate batches per day

Most food cycles take 18–30 hours, so plan on one batch per chamber per day. Pre-freezing loaded trolleys in a separate freezing room keeps the dryer running only drying cycles.

Step 3 — Apply a loading density

Our trays measure 400 × 600 mm. At typical loading depths, plan 8–10 kg of wet product per m². Thin slices load lighter; purées and diced meat load heavier.

Step 4 — Choose a standard chamber

Daily wet inputDrying area neededSuggested setup
Up to 200 kg≈ 20 m²1 × QS-FD-20
400 kg≈ 40 m²2 × QS-FD-20
1,000 kg≈ 104 m²1 × QS-FD-100
2,000 kg≈ 207 m²1 × QS-FD-200
4,000 kg≈ 415 m²2 × QS-FD-200

Worked example

A brand wants to sell 150 kg of freeze-dried mango per day. Mango yields about 15% finished weight, so it needs 1,000 kg of fresh mango daily. At one batch per day and 9.6 kg/m², that is about 104 m² — exactly one QS-FD-100.

Try the freeze dryer sizing calculator on our home page, or send us your numbers for an engineered recommendation.

Don’t forget the utilities

Check incoming power (35 kW for a QS-FD-20, 135 kW for a QS-FD-100), cooling method for the refrigeration condenser, floor space for trolleys and a freezing room, and a dry, low-humidity packing area.

LyoFry Process Engineering Team

Engineers who design, build and commission freeze dryers and vacuum fryers at Shanghai Mars Industrial Co., Ltd., Shanghai.

Related Questions

How many kilograms per square metre does a freeze dryer hold?

For typical sliced fruit and vegetables, plan about 8–10 kg of wet product per m² of shelf area. Our QS-FD-20 holds about 200 kg on 20.16 m².

Is it better to buy one large or two smaller freeze dryers?

Two smaller chambers add redundancy and scheduling flexibility; one large chamber has lower cost and energy per m². Many plants above 1 ton/day choose multiple QS-FD-100 or QS-FD-200 chambers.

Start a project

Tell us what you make. We’ll engineer the line.

Send your product, daily output and voltage — we reply with a configuration and quotation within one business day.

WhatsApp

Get a Free Quote

Our engineers reply within one business day.